Cisco Catalyst 4500-X Series Switch WS-C4500X-32SFP+ Overview
Cisco Catalyst 4500-X Series Switch WS-C4500X-32SFP+ is a genuine modular capacity expansion product from Cisco, a global name in networking whose platforms are used by enterprises, service providers and data-center operators alike. Belonging to the Cisco Catalyst 4500-X Series family, the WS-C4500X-32SFP+ unit is built to the original factory specification, so it integrates with existing Cisco deployments predictably and behaves exactly as the platform documentation describes. In the network, it is installed into a compatible chassis slot, where it works alongside the supervisor and line cards to extend the platform’s capabilities.
From a specification standpoint, it offers 32 ports for client, server or uplink connectivity. These are the original factory figures for this model, giving administrators a clear picture of what the unit can deliver before it enters service. Standard mounting, cabling and management practices apply, so deployment follows the same procedures as other Cisco hardware already running in the environment.
Typical deployments include short-reach data-center interconnects, campus backbone fiber links, and carrier access and metro networks. Organizations commonly source it for refresh programs, capacity expansion and spares management, keeping a tested unit on hand so outages stay short and replacements are predictable. The factory detail for this unit reads: “Cisco Catalyst 4500-X Series Switch WS-C4500X-32SFP+ 4500-X 32 Port 10G IP Base Switch”. This makes it a practical choice when original-spec hardware is required at a predictable cost.
Every unit at LinkNewNet is inspected and tested before dispatch, and stock is graded, cleaned and verified for correct operation, including port status, console access and firmware state. Our warranty coverage and responsive technical support protect the purchase after it arrives, and our team can confirm revision levels and software compatibility before you order. For volume requirements we also offer configuration checks and staged delivery options.
Contact our sales team for current availability, lead time and shipping options for the WS-C4500X-32SFP+. We respond quickly with stock status and a firm quote, so you can plan the refresh or expansion with confidence.
Key Specifications
Applications
Capacity Expansion
Add ports and performance to existing chassis.
Upgrade Path
Modernize aging platforms with compatible modules.
Flexible I/O
Mix copper, fiber and high-speed uplinks.
Upgrade Path
WS-C4500X-32SFP+ is end-of-life. See how to upgrade to Catalyst 9500 →
Buying a Pre-Owned WS-C4500X-32SFP+
Verify the unit is tested, firmware confirmed, and condition documented. Every unit is fully tested and warranty covered. Contact our team for current stock and availability.
| WS-C4500X-32SFP+ | |
| Product list | |
| Product code | WS-C4500X-32SFP+ |
| Power cable | No |
| Button | No |
| Product parameters | |
| Port | 32 |
| Port Type | SFP SFP+ |
| Ethernet Technology | 10 Gigabit Ethernet |
| Network Technology | 10/100/1000Base-T |
| Layer Supported | 2 |
| Standard Memory | 4 GB |
| Flash Memory | 2 GB |
| Management | QoS VLAN DHCP RMON 1/2 ACL |
| Compliant Standards | IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ad (LACP), IEEE 802.3ae |
| Introduction | WS-C4500X-32SFP+ provides scalable, fixed-campus aggregation solutions in space-constrained environments. The solution provides flexibility to build desired port density through two versions of base switches along with optional uplink module. |
| Power Device | |
| Power Source | Power Supply |
| Max Supported Qty | 2 |
| Input Voltage | 110 V AC 220 V AC |
| Physical specifications | |
| Width | 17.5 in |
| Height | 1.8 in |
| Depth | 17.7 in |
| Weight | 15.48 lbs |
| Environmental Parameters | |
| Min Temperature | 32 °F |
| Max Temperature | 104 °F |
| Humidity Operating | 10 - 90% (non-condensing) |
