Juniper EX8200-8XS Module Overview
Juniper EX8200-8XS Module is a genuine expansion module from Juniper Networks, a specialist in high-performance routing and switching trusted in service-provider and large-enterprise networks. Belonging to the Juniper family, the EX8200-8XS unit is built to the original factory specification, so it integrates with existing Juniper deployments predictably and behaves exactly as the platform documentation describes. In the network, it installs into a compatible slot on a Juniper chassis or switch, where it adds ports, uplinks or forwarding capacity to the platform.
This unit follows the original factory specification for the Juniper family, covering its intended role without compatibility surprises. The factory detail for this unit reads: “Juniper EX8200 Series Expansion Module EX8200-8XS 8-port 10 GbE SFP+ line card; requires SFP+ optics”. This makes it a practical choice when original-spec hardware is required at a predictable cost.
Typical deployments include capacity expansion and uplink upgrades in chassis-based switching platforms, where additional ports and forwarding capacity are required. Organizations commonly source it for refresh programs, capacity expansion and spares management, keeping a tested unit on hand so outages stay short and replacements are predictable.
Every unit at LinkNewNet is inspected and tested before dispatch, and stock is graded, cleaned and verified for correct operation. Our warranty coverage and responsive technical support protect the purchase after it arrives, and our team can confirm revision levels and compatibility before you order. For volume requirements we also offer configuration checks and staged delivery options.
Contact our sales team for current availability, lead time and shipping options for the Juniper EX8200-8XS. We respond quickly with stock status and a firm quote, so you can plan the refresh or expansion with confidence.
Key Specifications
Applications
Capacity Expansion
Add ports and performance to existing chassis.
Upgrade Path
Modernize aging platforms with compatible modules.
Flexible I/O
Mix copper, fiber and high-speed uplinks.
Buying a Pre-Owned EX8200-8XS
Verify the unit is tested, firmware confirmed, and condition documented. Every unit is fully tested and warranty covered. Contact our team for current stock and availability.
| EX8200-8XS | |
| Product list | |
| Product code | EX8200-8XS |
| Power cable | No |
| Button | No |
| Product parameters | |
| Application | Data Networking |
| Data Transfer Rate | 10 Gbit/s |
| Expansion Slots | 8 |
| Expansion Slot Type | XFP |
| Introduction | EX8200-8XS Line Card is an eight-port 10GBASE-X line card with compact, modular SFP+ fiber optic interfaces, enabling up to 64 line-rate 10-Gigabit Ethernet ports in an EX8208 chassis and 128 ports in an EX8216 chassis. |
| Physical specifications | |
| Width | 14.4 in |
| Height | 1.6 in |
| Depth | 20.5 in |
| Weight | 13.25 lbs |
EX8200-8XS - Module Notes
This EX8200-8XS line card/module variant is designed for the chassis slot type and fabric requirements of its platform family. Verify the slot compatibility, supported forwarding modes, and firmware version required for this specific SKU before ordering.
For capacity expansion, confirm the port density, uplink type, and any software feature dependencies of this module. Our team can verify revision levels and platform compatibility before dispatch.
Each EX8200-8XS module is inspected, tested and verified for correct operation before leaving our facility, including port status, management access and firmware state.
EX8200-8XS - Module Notes
This EX8200-8XS line card/module variant is designed for the chassis slot type and fabric requirements of its platform family. Verify the slot compatibility, supported forwarding modes, and firmware version required for this specific SKU before ordering.
For capacity expansion, confirm the port density, uplink type, and any software feature dependencies of this module. Our team can verify revision levels and platform compatibility before dispatch.
Each EX8200-8XS module is inspected, tested and verified for correct operation before leaving our facility, including port status, management access and firmware state.
EX8200-8XS - Juniper Series Notes
This listing is part of the Juniper enterprise networking product family, sourced and tested by LinkNewNet for enterprise deployment. Juniper product is deployed in enterprise network infrastructure roles, providing reliable connectivity, management, and integration with the broader Juniper ecosystem.
Deployment guidance: When planning this EX8200-8XS unit into a network, confirm the Junos OS version required, the power and cooling profile, and the upstream/downstream interface types that match your existing infrastructure. For a like-for-like refresh, match the feature set of the units already in service so management and automation behave consistently.
Our Juniper reconditioning process: Every pre-owned Juniper unit at LinkNewNet passes a documented reconditioning flow before dispatch - visual inspection, internal cleaning, firmware verification, port-by-port testing, and configuration reset to factory defaults. This ensures the unit you receive operates reliably and integrates cleanly with your existing Juniper management tools.
Related models in this family: EX8208-SRE320, EX8208, EX4500-40F-VC1-BF, EX4200-48T, EX4200-24F, EX8200-48F, EX8200-48T, EX8200-PWR-AC3K, EX8208-FAN-S. Compare specifications to confirm the right port density, feature set and uplink options for your deployment.
Model code: S = SFP/SFP+ fiber ports - this suffix indicates the feature set, power, or port type of the EX8200-8XS, which affects software licensing and regional compliance.







