H3C SFP Transceiver Single Mode SFP-GE-LX-SM1310-D Overview
H3C SFP Transceiver Single Mode SFP-GE-LX-SM1310-D is a genuine modular capacity expansion product from H3C, a major enterprise networking vendor with strong presence in campus, data-center and carrier deployments. Belonging to the H3C family, the SFP-GE-LX-SM1310-D unit is built to the original factory specification, so it integrates with existing H3C deployments predictably and behaves exactly as the platform documentation describes. In the network, it is installed into a compatible chassis slot, where it works alongside the supervisor and line cards to extend the platform’s capabilities.
This unit follows the original factory specification for the H3C family, covering its intended role without compatibility surprises. Standard mounting, cabling and management practices apply, and it interoperates with surrounding hardware using the same procedures as other H3C equipment already deployed in the network.
Typical deployments include short-reach data-center interconnects, campus backbone fiber links, and carrier access and metro networks. Organizations commonly source it for refresh programs, capacity expansion and spares management, keeping a tested unit on hand so outages stay short and replacements are predictable. The factory detail for this unit reads: “H3C SFP Transceiver Single Mode SFP-GE-LX-SM1310-D”. This makes it a practical choice when original-spec hardware is required at a predictable cost.
Every unit at LinkNewNet is inspected and tested before dispatch, and stock is graded, cleaned and verified for correct operation, including port status, console access and firmware state. Our warranty coverage and responsive technical support protect the purchase after it arrives, and our team can confirm revision levels and software compatibility before you order. For volume requirements we also offer configuration checks and staged delivery options.
Contact our sales team for current availability, lead time and shipping options for the SFP-GE-LX-SM1310-D. We respond quickly with stock status and a firm quote, so you can plan the refresh or expansion with confidence.
Key Specifications
Applications
Capacity Expansion
Add ports and performance to existing chassis.
Upgrade Path
Modernize aging platforms with compatible modules.
Flexible I/O
Mix copper, fiber and high-speed uplinks.
Buying a Pre-Owned SFP-GE-LX-SM1310-D
Verify the unit is tested, firmware confirmed, and condition documented. Every unit is fully tested and warranty covered. Contact our team for current stock and availability.
| SFP-GE-LX-SM1310-D | |
| Product list | |
| Product code | SFP-GE-LX-SM1310-D |
| Power cable | No |
| Button | No |
| Product parameters | |
| Transceiver Type | LX |
| Reach | 10 km |
| Connector | LC |
| Form Type | SFP |
| Date rate | 1250 Mbps |
| Wavelength | 1310 nm |
| Media | SMF |
| Speed Description | 1-Gigabit |
| Speed | 1000 base |
| Physical specifications | |
| HxWxD | 1.2 in. x 2.75 in. x 4.75 in. |
| Weight | 0.4 lbs |
| Environmental Parameters | |
| Min Temperature | 23 °F |
| Max Temperature | 131 °F |
| Humidity Operating | 5 - 95% (non-condensing) |
SFP-GE-LX-SM1310-D - Compatibility Notes
This SFP-GE-LX-SM1310-D transceiver/module variant is specified for the reach, wavelength, and form factor indicated in the specifications above. Confirm compatibility with your switch or router platform, including the required coding (Cisco, Juniper, Huawei, H3C) and supported data rate, before ordering.
When building out or refreshing links, match the transceiver variant to the optics budget and distance of each run. Our team can confirm compatibility with specific platforms and provide bulk pricing.
Each SFP-GE-LX-SM1310-D unit is tested for correct operation and performance before dispatch, ensuring reliable link establishment on arrival.
SFP-GE-LX-SM1310-D Quick Specifications
| Model | SFP-GE-LX-SM1310-D |
| Product Type | SFP |
| Form Factor | module |
| Series Profile | a gigabit SFP optical transceiver module |
SFP-GE-LX-SM1310-D Deployment Scenarios
The SFP is a gigabit SFP optical transceiver module. In practice, this positions it for optical connectivity: it is deployed for interconnecting switches and routers over single-mode or multi-mode fiber. Administrators typically choose this model when their network needs SFP and they want a unit whose port layout and feature set match the role without overspending. It is commonly sourced for refresh programs, capacity expansion and spares management, and it integrates with the rest of the H3C fleet using the same management tools and CLI conventions.
H3C Reconditioning & Warranty
Every H3C unit at LinkNewNet goes through a dedicated reconditioning flow: hardware inspection, port-level testing, and verification of the Comware software state on supported models. Units are cleaned, graded and repackaged, and serialized records are kept so you can confirm what was tested. Each unit ships with warranty coverage and access to our technical support team; for H3C-specific questions about IRF stacking, Comware versions or port configuration we can confirm details before you order. Volume and project pricing is available on request.
