GLC-FE-100EX - Cisco SFP Module Overview
GLC-FE-100EX - Cisco SFP Module is a genuine modular capacity expansion product from Cisco, a global name in networking whose platforms are used by enterprises, service providers and data-center operators alike. Belonging to the Cisco family, the GLC-FE-100EX unit is built to the original factory specification, so it integrates with existing Cisco deployments predictably and behaves exactly as the platform documentation describes. In the network, it is installed into a compatible chassis slot, where it works alongside the supervisor and line cards to extend the platform’s capabilities.
From a specification standpoint, it offers 1 ports for client, server or uplink connectivity. These are the original factory figures for this model, giving administrators a clear picture of what the unit can deliver before it enters service. Standard mounting, cabling and management practices apply, so deployment follows the same procedures as other Cisco hardware already running in the environment.
Typical deployments include short-reach data-center interconnects, campus backbone fiber links, and carrier access and metro networks. Organizations commonly source it for refresh programs, capacity expansion and spares management, keeping a tested unit on hand so outages stay short and replacements are predictable. The factory detail for this unit reads: “100BASE-EX for Fast Ethernet SFP Ports”. This makes it a practical choice when original-spec hardware is required at a predictable cost.
Every unit at LinkNewNet is inspected and tested before dispatch, and stock is graded, cleaned and verified for correct operation, including port status, console access and firmware state. Our warranty coverage and responsive technical support protect the purchase after it arrives, and our team can confirm revision levels and software compatibility before you order. For volume requirements we also offer configuration checks and staged delivery options.
Contact our sales team for current availability, lead time and shipping options for the GLC-FE-100EX. We respond quickly with stock status and a firm quote, so you can plan the refresh or expansion with confidence.
Key Specifications
Applications
Capacity Expansion
Add ports and performance to existing chassis.
Upgrade Path
Modernize aging platforms with compatible modules.
Flexible I/O
Mix copper, fiber and high-speed uplinks.
Buying a Pre-Owned GLC-FE-100EX
Verify the unit is tested, firmware confirmed, and condition documented. Every unit is fully tested and warranty covered. Contact our team for current stock and availability.
GLC-FE-100EX Specifications | |
Product Type | SFP |
Interface Type | 100BASE-EX |
Number of Ports/Channels | 1 |
Application/Usage | Data Networking |
Interfaces/Ports | 1 x 100Base-EX |
Interfaces/Ports Details | 1 x LC Duplex 100Base-EX |
Connectivity Media | 1310 nm Multi-mode Optical Fiber 100Base-EX |
Form Factor | Hot-swappable |
Data Transfer Rate | 100 Mbps Fast Ethernet |
Wavelength (nm) | 1310 |
Fiber Type | SMF |
Cable Distance | 40 km (131,240 ft) |
Transmit (dBm) | Maximum: 0 |
Receive (dBm) | Maximum: -8 |
Dimensions (H x W x D) | 8.5 x 13.4 x 56.5 mm |
Operating temperature range | Commercial temperature range (COM): 0 to 70°C (32 to 158°F), applicable to GLC-GE-100FX, GLC-FE-100BX-D, GLC-FE-100BX-U, and GLC FE 100ZX |
Storage temperature range | -40 to 85°C (-40 to 185°F) |
