Cisco Nexus 9500 Series Fabric Modules N9K-C9516-FM Overview
Cisco Nexus 9500 Series Fabric Modules N9K-C9516-FM is a genuine modular capacity expansion product from Cisco, a global name in networking whose platforms are used by enterprises, service providers and data-center operators alike. Belonging to the Cisco Nexus 9500 Series family, the N9K-C9516-FM unit is built to the original factory specification, so it integrates with existing Cisco deployments predictably and behaves exactly as the platform documentation describes. In the network, it is installed into a compatible chassis slot, where it works alongside the supervisor and line cards to extend the platform’s capabilities.
From a specification standpoint, aggregate capacity of 2560 Gbps. These are the original factory figures for this model, giving administrators a clear picture of what the unit can deliver before it enters service. Standard mounting, cabling and management practices apply, so deployment follows the same procedures as other Cisco hardware already running in the environment.
Typical deployments include adding ports and performance to existing chassis systems, modernizing legacy platforms with compatible line cards, and mixing copper, fiber and high-speed uplinks in one chassis. Organizations commonly source it for refresh programs, capacity expansion and spares management, keeping a tested unit on hand so outages stay short and replacements are predictable. The factory detail for this unit reads: “Cisco Nexus 9500 Series Fabric Modules N9K-C9516-FM”. This makes it a practical choice when original-spec hardware is required at a predictable cost.
Every unit at LinkNewNet is inspected and tested before dispatch, and stock is graded, cleaned and verified for correct operation, including port status, console access and firmware state. Our warranty coverage and responsive technical support protect the purchase after it arrives, and our team can confirm revision levels and software compatibility before you order. For volume requirements we also offer configuration checks and staged delivery options.
Contact our sales team for current availability, lead time and shipping options for the N9K-C9516-FM. We respond quickly with stock status and a firm quote, so you can plan the refresh or expansion with confidence.
Key Specifications
Applications
Capacity Expansion
Add ports and performance to existing chassis.
Upgrade Path
Modernize aging platforms with compatible modules.
Flexible I/O
Mix copper, fiber and high-speed uplinks.
Buying a Pre-Owned N9K-C9516-FM
Verify the unit is tested, firmware confirmed, and condition documented. Every unit is fully tested and warranty covered. Contact our team for current stock and availability.
| N9K-C9516-FM | |
| Product list | |
| Product code | N9K-C9516-FM |
| Power cable | No |
| Button | No |
| Product parameters | |
| Capacity | 2560 Gbps |
| Typical power | 330 W |
| Maximum power | 504 W |
| MTBF hours | 650,780 |
| Hot swappable | Yes |
| Airflow | Port-side intake |
| Features | Cisco Nexus 9500 Series Fabric Modules N9K-C9516-FM |
| Introduction | The Cisco Nexus 9500 platform is designed as a Clos fabric that interconnects each line card directly with each rear-mounted fabric module. All traffic between the line cards is load balanced across all fabric modules, providing optimal bandwidth distribution within the chassis. This load-balancing capability provides enhanced system reliability and redundancy. The switch continues to operate even in the event of a loss of a fabric module, albeit at a lower capacity, as the remaining fabric modules continue to provide switching capacity to the line cards. |
| Physical specifications | |
| Weight | 11.5 Ib |
| Compatibility Information | |
| Apply to | Cisco Nexus 9500 Switches |
N9K-C9516-FM - Module Notes
This N9K-C9516-FM line card/module variant is designed for the chassis slot type and fabric requirements of its platform family. Verify the slot compatibility, supported forwarding modes, and firmware version required for this specific SKU before ordering.
For capacity expansion, confirm the port density, uplink type, and any software feature dependencies of this module. Our team can verify revision levels and platform compatibility before dispatch.
Each N9K-C9516-FM module is inspected, tested and verified for correct operation before leaving our facility, including port status, management access and firmware state.
N9K-C9516-FM - Cisco Series Notes
This listing is part of the Cisco enterprise networking product family, sourced and tested by LinkNewNet for enterprise deployment. Cisco module/line card expands the capability of a chassis platform, adding interface density, forwarding capacity, or service features. It is installed in a matching chassis slot and managed as part of the parent platform.
Deployment guidance: When planning this N9K-C9516-FM unit into a network, confirm the software image (IOS/IOS-XE/NX-OS) required, the power and cooling profile, and the upstream/downstream interface types that match your existing infrastructure. For a like-for-like refresh, match the feature set of the units already in service so management and automation behave consistently.
Our Cisco reconditioning process: Every pre-owned Cisco unit at LinkNewNet passes a documented reconditioning flow before dispatch - visual inspection, internal cleaning, firmware verification, port-by-port testing, and configuration reset to factory defaults. This ensures the unit you receive operates reliably and integrates cleanly with your existing Cisco management tools.
Related models in this family: AIR-LAP1142N-E-K9, A9K-750W-AC, ASR1000-ESP40, A9K-2X100GE-TR, ASR1000-6TGE. Compare specifications to confirm the right port density, feature set and uplink options for your deployment.
