Cisco MDS 9500 Series Supervisor Module DS-X9530-SF2AK9 Overview
Cisco MDS 9500 Series Supervisor Module DS-X9530-SF2AK9 is a genuine modular capacity expansion product from Cisco, a global name in networking whose platforms are used by enterprises, service providers and data-center operators alike. Belonging to the Cisco MDS 9500 Series family, the DS-X9530-SF2AK9 unit is built to the original factory specification, so it integrates with existing Cisco deployments predictably and behaves exactly as the platform documentation describes. In the network, it is installed into a compatible chassis slot, where it works alongside the supervisor and line cards to extend the platform’s capabilities.
This unit follows the original factory specification for the Cisco MDS 9500 Series family, covering its intended role without compatibility surprises. Standard mounting, cabling and management practices apply, and it interoperates with surrounding hardware using the same procedures as other Cisco equipment already deployed in the network.
Typical deployments include adding ports and performance to existing chassis systems, modernizing legacy platforms with compatible line cards, and mixing copper, fiber and high-speed uplinks in one chassis. Organizations commonly source it for refresh programs, capacity expansion and spares management, keeping a tested unit on hand so outages stay short and replacements are predictable. The factory detail for this unit reads: “Cisco MDS 9500 Series Supervisor Module DS-X9530-SF2AK9”. This makes it a practical choice when original-spec hardware is required at a predictable cost.
Every unit at LinkNewNet is inspected and tested before dispatch, and stock is graded, cleaned and verified for correct operation, including port status, console access and firmware state. Our warranty coverage and responsive technical support protect the purchase after it arrives, and our team can confirm revision levels and software compatibility before you order. For volume requirements we also offer configuration checks and staged delivery options.
Contact our sales team for current availability, lead time and shipping options for the DS-X9530-SF2AK9. We respond quickly with stock status and a firm quote, so you can plan the refresh or expansion with confidence.
Key Specifications
Applications
Capacity Expansion
Add ports and performance to existing chassis.
Upgrade Path
Modernize aging platforms with compatible modules.
Flexible I/O
Mix copper, fiber and high-speed uplinks.
Buying a Pre-Owned DS-X9530-SF2AK9
Verify the unit is tested, firmware confirmed, and condition documented. Every unit is fully tested and warranty covered. Contact our team for current stock and availability.
| DS-X9530-SF2AK9 | |
| Product list | |
| Product code | DS-X9530-SF2AK9 |
| Power cable | No |
| Button | No |
| Product parameters | |
| Product Compatibility | Cisco MDS 9500 Series directors |
| Software Compatibility | Cisco MDS SAN-OS Release 3.0 (1) or later |
| Interfaces | ●(1) RS-232 RJ-45 console port ●(1) 10/100/1000 Ethernet management port ●(1) DB-9 COM port ●(1) Compact Flash interface ●(2) USB 2.0 port |
| Indicators | ●Status LED ●System LED ●Power management LED ●Active/standby LED |
| Switching Bandwidth | • 700 Gbps per Cisco MDS 9500 Series Supervisor-2 Module (1.4 Tbps when both Supervisor-2 modules present) • 1.1 Tbps when combined with the Cisco MDS 9513 Crossbar Module (2.2 Tbps when both Crossbar modules present) |
| Physical specifications | |
| Width | 14.4 in |
| Depth | 16 in |
| Height | 1.75 in |
| Weight | 7.25 lbs |
| Environmental Parameters | |
| Min Operating Temperature | 32 °F |
| Max Operating Temperature | 104 °F |
| Humidity Range Operating | 10 - 90% |
DS-X9530-SF2AK9 - Module Notes
This DS-X9530-SF2AK9 line card/module variant is designed for the chassis slot type and fabric requirements of its platform family. Verify the slot compatibility, supported forwarding modes, and firmware version required for this specific SKU before ordering.
For capacity expansion, confirm the port density, uplink type, and any software feature dependencies of this module. Our team can verify revision levels and platform compatibility before dispatch.
Each DS-X9530-SF2AK9 module is inspected, tested and verified for correct operation before leaving our facility, including port status, management access and firmware state.
DS-X9530-SF2AK9 - Module Notes
This DS-X9530-SF2AK9 line card/module variant is designed for the chassis slot type and fabric requirements of its platform family. Verify the slot compatibility, supported forwarding modes, and firmware version required for this specific SKU before ordering.
For capacity expansion, confirm the port density, uplink type, and any software feature dependencies of this module. Our team can verify revision levels and platform compatibility before dispatch.
Each DS-X9530-SF2AK9 module is inspected, tested and verified for correct operation before leaving our facility, including port status, management access and firmware state.
