Cisco Catalyst 2960-X Series Power Supply C3K-PWR-750WAC Overview
Cisco Catalyst 2960-X Series Power Supply C3K-PWR-750WAC is a genuine modular capacity expansion product from Cisco, a global name in networking whose platforms are used by enterprises, service providers and data-center operators alike. Belonging to the Cisco Catalyst 2960-X Series family, the C3K-PWR-750WAC unit is built to the original factory specification, so it integrates with existing Cisco deployments predictably and behaves exactly as the platform documentation describes. In the network, it is installed into a compatible chassis slot, where it works alongside the supervisor and line cards to extend the platform’s capabilities.
This unit follows the original factory specification for the Cisco Catalyst 2960-X Series family, covering its intended role without compatibility surprises. Standard mounting, cabling and management practices apply, and it interoperates with surrounding hardware using the same procedures as other Cisco equipment already deployed in the network.
Typical deployments include redundant power for mission-critical switches and routers, hot-swappable replacement in live production environments, and hot-swappable replacement in live production environments. Organizations commonly source it for refresh programs, capacity expansion and spares management, keeping a tested unit on hand so outages stay short and replacements are predictable. The factory detail for this unit reads: “Cisco Catalyst 2960-X Series Power Supply C3K-PWR-750WAC”. This makes it a practical choice when original-spec hardware is required at a predictable cost.
Every unit at LinkNewNet is inspected and tested before dispatch, and stock is graded, cleaned and verified for correct operation, including port status, console access and firmware state. Our warranty coverage and responsive technical support protect the purchase after it arrives, and our team can confirm revision levels and software compatibility before you order. For volume requirements we also offer configuration checks and staged delivery options.
Contact our sales team for current availability, lead time and shipping options for the C3K-PWR-750WAC. We respond quickly with stock status and a firm quote, so you can plan the refresh or expansion with confidence.
Key Specifications
Applications
Capacity Expansion
Add ports and performance to existing chassis.
Upgrade Path
Modernize aging platforms with compatible modules.
Flexible I/O
Mix copper, fiber and high-speed uplinks.
Buying a Pre-Owned C3K-PWR-750WAC
Verify the unit is tested, firmware confirmed, and condition documented. Every unit is fully tested and warranty covered. Contact our team for current stock and availability.
| C3K-PWR-750WAC | |
| Product list | |
| Product code | C3K-PWR-750WAC |
| Product parameters | |
| Power Supply Rated Maximum | 750W |
| Power Cord Rating | 15A |
| Input current | 10-5A |
| Power-Supply Input Receptacles | IEC 320-C13 (IEC60320-C13) |
| Output Holdup Time | 20 ms minimum |
| Output ratings | 12V@25A and -52V@8.7A |
Input-Voltage Range and Frequency | 100-240 VAC, 50-60 Hz |
Total Output BTU (Note: 1000 BTU/hr = 293W) | 4225 BTU/Hr, 765W |
| Physical specifications | |
| Height | 1.65 inch(4.2cm) |
| Width | 6 inch(15.24 cm) |
| Depth | 11.4 inch(28.96 cm) |
| Weight | 3.9 pounds(1.8kg) |
| Compatibility information | |
| Apply to | Cisco 2960-X, 3750-E and 3560-E Series Switches |
