What common troubleshooting steps can I take if the WS-X6848-TX-2TXL isn't
working properly?
Verify connections, ensure module compatibility with the chassis, check for
software updates, and run diagnostic commands via CLI.
What accessories are recommended with the WS-X6848-TX-2TXL module?
Recommended accessories include RJ-45 cables of appropriate lengths and
DFC4XL daughter cards for enhanced forwarding performance.
How does the WS-X6848-TX-2TXL compare with other Catalyst 6500 switch
modules?
The WS-X6848-TX-2TXL provides higher port density and performance with its
fabric-enabled design compared to older modules.
Can the WS-X6848-TX-2TXL be used in a Catalyst Compact Switch?
No, the WS-X6848-TX-2TXL is designed specifically for Catalyst 6500 Series
Switches and is not compatible with Compact Switches.
How cost-effective is the WS-X6848-TX-2TXL?
The WS-X6848-TX-2TXL offers high port density and performance, making it a
cost-effective choice for expanding network capacity.
What are the key features of this module?
The WS-X6848-TX-2TXL features 48-port 10/100/1000 GE, fabric-enabled
connectivity, and RJ-45 DFC4XL, ideal for high-performance networks.
What are the common use cases for this module?
This module is commonly used in data centers and enterprise networks
requiring high-density 10/100/1000 GE ports for efficient data transfer and
scalability.
How do I install the WS-X6848-TX-2TXL?
Installation involves sliding the module into an available slot in a Catalyst
6500 chassis and securing it with the provided screws, then configuring via
Cisco IOS.
Does this module need frequent upgrades?
Upgrades are determined by network demands and Cisco updates. Regularly check
for firmware updates to ensure optimal performance and security.
Are there alternative products available?
Alternatives include other Catalyst 6500 modules, such as the
WS-X6548-GE-45AF, depending on specific network requirements and port density
needs.
What should I do if the module is not working?
First, check physical connections. If the issue persists, perform diagnostic
tests through Cisco IOS and refer to troubleshooting guides or contact Cisco
support.
What accessories are available for this module?
Available accessories include SFP transceivers, compatible power supplies,
and management cables, all designed to enhance module capabilities and
connectivity.
How does this module compare to WS-X6748-GE-T?
The WS-X6848-TX-2TXL offers enhanced performance with DFC4XL and higher port
density, while the WS-X6748-GE-T offers lower cost but fewer advanced
features.
How do I use the module's high-speed ports?
Configure the high-speed ports via Cisco IOS to ensure they are optimized for
your specific network applications and quality of service requirements.
How cost-effective is the WS-X6848-TX-2TXL?
The WS-X6848-TX-2TXL offers high port density and performance, making it a
cost-effective choice for expanding network capacity.
What are the key features of this module?
The WS-X6848-TX-2TXL features 48-port 10/100/1000 GE, fabric-enabled
connectivity, and RJ-45 DFC4XL, ideal for high-performance networks.
What are the common use cases for this module?
This module is commonly used in data centers and enterprise networks
requiring high-density 10/100/1000 GE ports for efficient data transfer and
scalability.
How do I install the WS-X6848-TX-2TXL?
Installation involves sliding the module into an available slot in a Catalyst
6500 chassis and securing it with the provided screws, then configuring via
Cisco IOS.
Does this module need frequent upgrades?
Upgrades are determined by network demands and Cisco updates. Regularly check
for firmware updates to ensure optimal performance and security.
Are there alternative products available?
Alternatives include other Catalyst 6500 modules, such as the
WS-X6548-GE-45AF, depending on specific network requirements and port density
needs.
What should I do if the module is not working?
First, check physical connections. If the issue persists, perform diagnostic
tests through Cisco IOS and refer to troubleshooting guides or contact Cisco
support.
What accessories are available for this module?
Available accessories include SFP transceivers, compatible power supplies,
and management cables, all designed to enhance module capabilities and
connectivity.
How does this module compare to WS-X6748-GE-T?
The WS-X6848-TX-2TXL offers enhanced performance with DFC4XL and higher port
density, while the WS-X6748-GE-T offers lower cost but fewer advanced
features.
How do I use the module's high-speed ports?
Configure the high-speed ports via Cisco IOS to ensure they are optimized for
your specific network applications and quality of service requirements.
Is the WS-X6848-TX-2TXL module cost-effective for large networks?
Yes, the WS-X6848-TX-2TXL is designed for large-scale enterprises needing
high port density and performance at a competitive price.
What are the key features of the WS-X6848-TX-2TXL module?
The WS-X6848-TX-2TXL offers 48 ports of 10/100/1000 GE, fabric-enabled with
RJ-45 and DFC4XL support for high performance and scalability.
In which application scenarios is the WS-X6848-TX-2TXL ideal?
This module is ideal for data center aggregations, enterprise core layers,
and high-performance distribution layers.
How do I install the WS-X6848-TX-2TXL module in a Catalyst 6500 Switch?
Slide the WS-X6848-TX-2TXL module into an available slot in your Catalyst
6500, ensure it's firmly seated, and secure it with the captive screws.
Does the WS-X6848-TX-2TXL require any software or firmware upgrades?
It's recommended to run the latest Cisco IOS software that supports the
module's features for optimal performance and compatibility.
Are there alternative Cisco modules to the WS-X6848-TX-2TXL?
Yes, alternatives include WS-X6748-GE-TX and WS-X6724-SFP, depending on
specific needs for port density and connectivity.
What common troubleshooting steps can I take if the WS-X6848-TX-2TXL isn't
working properly?
Verify connections, ensure module compatibility with the chassis, check for
software updates, and run diagnostic commands via CLI.
What accessories are recommended with the WS-X6848-TX-2TXL module?
Recommended accessories include RJ-45 cables of appropriate lengths and
DFC4XL daughter cards for enhanced forwarding performance.
How does the WS-X6848-TX-2TXL compare with other Catalyst 6500 switch
modules?
The WS-X6848-TX-2TXL provides higher port density and performance with its
fabric-enabled design compared to older modules.
Can the WS-X6848-TX-2TXL be used in a Catalyst Compact Switch?
No, the WS-X6848-TX-2TXL is designed specifically for Catalyst 6500 Series
Switches and is not compatible with Compact Switches.