What common troubleshooting steps are there for the WS-X6148A-RJ-45?
Ensure that the module is properly seated, power is available, and compatible
software is running. Check LEDs for status indications.
What accessories are available for WS-X6148A-RJ-45 module?
Accessories include replacement retaining screws, compatible transceivers,
and PoE power supplies. Consult Cisco's accessory catalog for details.
How does the WS-X6148A-RJ-45 compare with other Catalyst 6500 modules?
The WS-X6148A-RJ-45 is a cost-effective option with PoE support, but other
modules like WS-X6748-GE-TX offer higher port speeds.
Can I use the WS-X6148A-RJ-45 in a non-Cisco switch?
The WS-X6148A-RJ-45 is designed specifically for Cisco Catalyst 6500 switches
and may not be compatible with non-Cisco hardware.
How does the WS-X6148A-RJ-45 support PoE devices?
The module supports Power over Ethernet (PoE) 802.3af, allowing it to power
devices such as IP phones and cameras directly through network cables,
eliminating the need for additional power supplies.
Can the WS-X6148A-RJ-45 be used in high-density deployments?
Yes, with its 48-Port 10/100 functionality, it's ideal for high-density
deployments in enterprise networks, enabling connectivity for a large number of
devices.
Is the WS-X6148A-RJ-45 module easy to install?
Yes, it's designed for easy insertion into the Catalyst 6500 Series chassis,
making setup quick and straightforward for system integrators.
Does the module require any special configuration for TDR?
The Time Domain Reflectometer (TDR) feature helps diagnose cable problems. It
requires minimal configuration and can be easily managed via the network
administration interface.
Are there any alternative products if this module is over my budget?
Comparable alternatives include the WS-X6148-GE-TX or WS-X6548-GE-TX modules,
although they have different features. Assessing needs against features is
crucial for cost-effectiveness.
What troubleshooting features are available on the WS-X6148A-RJ-45?
It offers diagnostic capabilities such as TDR for cable issues, LED
indicators for port statuses, and support for remote management for
troubleshooting.
How can I ensure the WS-X6148A-RJ-45 continues to meet network demands?
Regular firmware updates and utilizing its upgradeable PoE feature ensure the
module stays current with evolving network requirements.
What accessories come with the WS-X6148A-RJ-45 module?
Typically, the module comes with necessary mounting accessories for the
Catalyst 6500 Series chassis. However, it's important to verify with the seller
for used products.
How does the WS-X6148A-RJ-45 handle network security?
While it primarily focuses on connectivity, network security can be enhanced
through configurations on the Catalyst 6500 series chassis, using ACLs and other
security features.
Can the WS-X6148A-RJ-45 module support a mix of PoE and non-PoE devices?
Yes, it can support both PoE and non-PoE devices simultaneously, providing
flexibility for deploying a wide range of network devices.
How cost-effective is the WS-X6148A-RJ-45 module?
The WS-X6148A-RJ-45 module offers a budget-friendly solution for expanding
your Catalyst 6500 series switch, providing 48 ports with 10/100 Mbps
support.
What features does the WS-X6148A-RJ-45 module have?
The WS-X6148A-RJ-45 module includes 48 10/100 Mbps ports and TDR
capabilities, and supports PoE 802.3af for powering connected devices.
What are the typical application scenarios for the WS-X6148A-RJ-45
module?
This module is ideal for expanding network capacity in mid-sized enterprises,
offering robust port density and PoE support for IP phones and cameras.
How to install the WS-X6148A-RJ-45 in a Catalyst 6500 switch?
The WS-X6148A-RJ-45 can be installed by sliding it into an available slot and
securing it with the retaining screws. Refer to the Catalyst 6500 installation
guide.
Does the WS-X6148A-RJ-45 module require any upgrades?
The WS-X6148A-RJ-45 module supports firmware upgrades to enhance performance
and add features. Check Cisco's website for the latest updates.
Are there alternative modules to the WS-X6148A-RJ-45?
Yes, alternatives include other Catalyst 6500 line cards such as the
WS-X6748-GE-TX, which provides 48-port 10/100/1000 Mbps support.
What common troubleshooting steps are there for the WS-X6148A-RJ-45?
Ensure that the module is properly seated, power is available, and compatible
software is running. Check LEDs for status indications.
What accessories are available for WS-X6148A-RJ-45 module?
Accessories include replacement retaining screws, compatible transceivers,
and PoE power supplies. Consult Cisco's accessory catalog for details.
How does the WS-X6148A-RJ-45 compare with other Catalyst 6500 modules?
The WS-X6148A-RJ-45 is a cost-effective option with PoE support, but other
modules like WS-X6748-GE-TX offer higher port speeds.
Can I use the WS-X6148A-RJ-45 in a non-Cisco switch?
The WS-X6148A-RJ-45 is designed specifically for Cisco Catalyst 6500 switches
and may not be compatible with non-Cisco hardware.