What common troubleshooting steps should I follow?
Check port status LEDs, ensure cables are connected properly, and verify
switch configurations for any issues.
What accessories are compatible with this module?
Compatible accessories include various SFP modules for fiber or copper
connections as per network requirements.
How does WS-X4248-FE-SFP compare with similar products?
It provides a cost-effective solution with 100BASE-X support, unlike
higher-end models offering gigabit speeds.
Is this module suitable for expanding existing networks?
Yes, the WS-X4248-FE-SFP is ideal for increasing port density and network
capacity within existing Catalyst 4500 setups.
How does the WS-X4248-FE-SFP linecard improve network performance?
The WS-X4248-FE-SFP provides high-density Fast Ethernet connectivity,
enabling enhanced network performance and reliability with optional SFP modules
for uplink flexibility.
Can I use third-party SFPs with the WS-X4248-FE-SFP linecard?
While Cisco recommends using genuine Cisco SFP modules for compatibility and
reliability reasons, third-party modules that meet the linecard's standards may
work but are not officially supported.
What are the primary application scenarios for the WS-X4248-FE-SFP
linecard?
The WS-X4248-FE-SFP is suited for enterprise LAN access and branch office
deployments requiring a mix of Fast Ethernet connectivity with uplink
flexibility provided by SFP slots.
How does the WS-X4248-FE-SFP linecard compare to Gigabit Ethernet
linecards?
The WS-X4248-FE-SFP primarily offers Fast Ethernet (100BASE-X) ports, making
it ideal for environments where high-speed gigabit uplinks are not necessary,
prioritizing port density over speed.
What are the advantages of opting for the WS-X4248-FE-SFP over newer models
for a small enterprise?
Its cost-effectiveness and the ability to meet the specific bandwidth
requirements of small enterprises without the need for gigabit speeds make the
WS-X4248-FE-SFP a compelling choice.
Can the WS-X4248-FE-SFP linecard operate independently without a Cisco
Catalyst 4500 series chassis?
No, the WS-X4248-FE-SFP is a linecard designed specifically to slot into a
Cisco Catalyst 4500 series chassis and cannot operate independently.
Do I need to power down the Cisco Catalyst 4500 chassis to install the
WS-X4248-FE-SFP linecard?
Most Catalyst 4500 series chassis support hot swapping, allowing you to
install the WS-X4248-FE-SFP without powering down, but you should always check
specific model guidelines.
Are there any specific environmental requirements for the WS-X4248-FE-SFP
linecard?
The linecard should be operated in a clean, dust-free environment with
adequate cooling as per the Catalyst 4500 series specifications, avoiding
extreme temperatures and humidity.
How can I troubleshoot the WS-X4248-FE-SFP if it's not recognizing an
inserted SFP module?
Ensure the SFP is compatible and seated properly, check for dust or damage in
the port, and verify the configuration in the network management software. If
issues persist, the module or linecard may need to be replaced.
What accessories come with the WS-X4248-FE-SFP linecard?
The WS-X4248-FE-SFP typically comes with installation guides and may include
compatible SFP modules if specified at the time of purchase. Additional
accessories must be purchased separately.
How cost-effective is the WS-X4248-FE-SFP?
The WS-X4248-FE-SFP offers great value with 48 ports supporting 100BASE-X,
making it ideal for expanding network capacity on a budget.
What are the primary features of this module?
It includes 48 100BASE-X ports and is compatible with SFPs, ideal for
flexible network configurations.
What are the application scenarios for this linecard?
This module is best suited for enterprise environments requiring scalable
network solutions through the Catalyst 4500 series.
How do I install the WS-X4248-FE-SFP?
Simply insert the module into a compatible Catalyst 4500 switch slot and
ensure it is properly secured.
Does the WS-X4248-FE-SFP need regular upgrades?
No regular upgrades are needed, but firmware updates on the Catalyst 4500 can
enhance features and performance.
Are there any alternative products?
Alternative options include other Catalyst 4500 series linecards like
WS-X4448-GB-RJ45 for higher speeds.
What common troubleshooting steps should I follow?
Check port status LEDs, ensure cables are connected properly, and verify
switch configurations for any issues.
What accessories are compatible with this module?
Compatible accessories include various SFP modules for fiber or copper
connections as per network requirements.
How does WS-X4248-FE-SFP compare with similar products?
It provides a cost-effective solution with 100BASE-X support, unlike
higher-end models offering gigabit speeds.
Is this module suitable for expanding existing networks?
Yes, the WS-X4248-FE-SFP is ideal for increasing port density and network
capacity within existing Catalyst 4500 setups.