CE6810-EI-B00 Specification | |
10G Base-T Ports | 0 |
SFP+ Ports | 48 |
QSFP+ Ports | 4 |
Switching Capacity | 1.28 Tbit/s |
Forwarding Rate | 960 Mpps |
Airflow Design | Front-to-back or back-to-front |
Device Virtualization | iStack |
Super Virtual Fabric (SVF) | |
Network Virtualization | M-LAG |
TRILL (CE6810EI) | |
VM Awareness | Agile Controller |
Network Convergence | FCoE |
DCBX, PFC, and ETS | |
Programmability | OpenFlow |
OPS | |
Puppet and OVSDB plugins released on open source websites (CE6810EI) | |
Linux container for open source and customization programming | |
Traffic Analysis | NetStream |
sFlow | |
VLAN | Adding access, trunk, and hybrid interfaces to VLANs |
Default VLAN | |
QinQ | |
MUX VLAN | |
GVRP | |
ACL | Ingress: 2,250 |
MAC Address Table | Maximum: 64k |
Dynamic learning and aging of MAC addresses | |
Static, dynamic, and blackhole MAC address entries | |
Packet filtering based on source MAC addresses | |
MAC address limiting based on ports and VLANs | |
ARP (maximum) | 4k |
IPv4 FIB (maximum) | 16k |
IP Routing | IPv4 routing protocols, such as RIP, OSPF, BGP, and IS-IS |
IPv6 routing protocols, such as RIPng, OSPFv3, IS-ISv6, and BGP4+ (CE6810EI) | |
IPv6 FIB (maximum) | 8k |
Multicast FIB (maximum) | 2k |
QoS | Traffic classification based on Layer 2 headers, Layer 3 protocols, Layer 4 protocols, and 802.1p priority |
Actions of ACL, CAR, re-marking, and scheduling | |
Queue scheduling algorithms, including PQ, WRR, DRR, PQ + WRR, and PQ + DRR | |
Congestion avoidance mechanisms, including WRED and tail drop | |
Traffic shaping | |
Dimensions (W x D x H) | 442 mm x 600 mm x 43.6 mm |
Weight (fully loaded) | 10.4 kg (22.9 lb) |
Environmental Parameters | Operating temperature: 0°C to 40°C (32°F to 104°F) (0m to 1,800m) |
Operating Voltage | AC: 90V to 290V |
Max. Power Consumption | 238W |