CE5850-EI-B-B00 Specification | |
Base-T Ports | 48 |
SFP+ Ports | 4 |
QSFP+ Ports | 2 |
Switching Capacity | 336 Gbit/s |
Forwarding Rates | 252 Mpps |
Airflow Design | Front-to-back or back-to-front |
Device Virtualization | iStack |
Super Virtual Fabric (SVF) | |
Network Virtualization | M-LAG |
TRILL (CE5855 & CE5850) | |
VM Awareness | Agile Controller |
SDN | Open Programmability System (OPS) |
Traffic Analysis | NetStream |
sFlow | |
VLAN | Adding access, trunk, and hybrid interfaces to VLANs |
Default VLAN | |
QinQ | |
MUX VLAN | |
GVRP | |
ACL | ingress: 4.5k egress: 1k |
MAC Address Table | maximum: 128k |
Dynamic learning and aging of MAC addresses | |
Static, dynamic, and black hole MAC address entries | |
Packet filtering based on source MAC addresses | |
MAC address limiting based on ports and VLANs | |
Configuration and Maintenance | Console, Telnet, and SSH terminals |
Network management protocols, such as SNMPv1/v2c/v3 | |
File upload and download through FTP and TFTP | |
BootROM upgrade and remote upgrade | |
802.3az Energy Efficient Ethernet (EEE) | |
Hot patches | |
User operation logs | |
Zero-Touch Provisioning (ZTP) | |
Security and Management | 802.1x authentication |
Command line authority control based on user levels, preventing unauthorized users from using commands | |
DoS, ARP, and ICMP attack defenses | |
Port isolation, port security, and sticky MAC | |
Binding of the IP address, MAC address, interface number, and VLAN ID | |
Authentication methods, including AAA, RADIUS, and HWTACACS | |
Remote Network Monitoring (RMON) | |
Dimensions (W x D x H) | 442 mm x 420 mm x 43.6 mm |
Weight (fully loaded) | 8.8 kg (19.4 lb) |
Environmental Parameters | Operating temperature: 0°C to 40°C (32°F to 104°F) (0m to 1,800m) |
Storage temperature: -40°C to 70°C (-40°F to 158°F) | |
Relative humidity: 5% to 95%, non-condensing | |
Operating Voltage | AC: 90V to 264V |
DC: -38.4V to -72V | |
Maximum Power Consumption | 133W |