sales@linknewnet.com
+86 0755-89397811

WS-C2960XR-48LPD-I

 Model Number:
WS-C2960XR-48LPD-I Catalyst 2960-XR Series Switches
Detail:
Catalyst 2960-XR 48 GigE PoE 370W, 2 x 10G SFP+, IP Lite

 

WS-C2960XR-48LPD-I Overview

Cisco Catalyst 2960-XR series switches offer power resiliency with optional dual field-replaceable power supplies and IP Lite Cisco IOS software with dynamic routing and Layer 3 features. WS-C2960XR-48LPD-I is one of 2960-XR switches, IP Lite switch, supporting forty-eight 10/100/1000 Ethernet ports with POE+ and Two 10G SFP+ uplinks. IP Lite Image enables basic access layer 3 routing features, such as RIPV1, V2, OSPF stub, EIGRP stub, HSRP, VRRP, PIM stub, etc.

Quick Specs

Table 1. Cisco WS-C2960XR-48LPD-I Specs.

Product CodeWS-C2960XR-48LPD-I
DescriptionCisco Catalyst 2960XR 48 GigE PoE 370W+2 x 10G SFP+ IP Lite Switch
Enclosure TypeRack-mountable – 1U
Feature SetIP Lite
Uplink Interfaces2 x 10G SFP+ uplinks
Ports48 x 10/100/1000 (POE+)
Available PoE Power370W
Maximum stacking number8
Stack bandwidth80G
Forwarding Bandwidth108Gbps
Forwarding Performance130.9Mpps
Switching Bandwidth216 Gbps
RAM512 MB
Flash Memory128 MB
Dimensions44.5 cm x 40.8 cm x 4.45 cm
Package Weight16.15 Kg

Product Details

Figure 1 shows the front panel of WS-C2960XR-48LPD-I.

Note:

There are Forty-eight 10/100/1000 Ethernet Gigabit Ports and Two 10G SFP+ uplinks on the front panel.

Two USB Type A ports and one USB mini-Type B (console) port are on the left.

This switch offers one RJ-45 console port and one Ethernet management port on the left of the front panel.

Power over Ethernet Plus (PoE+) supports up to 370W of PoE budget for 12 ports with 30W per port or 24 ports with 15.4W per port or 48 ports with 7.4W per port.

Figure 2 shows the back panel of WS-C2960XR-48LPD-I.

Note:

(1)FlexStack-Plus module slot and cover
(2)Power supply slot (with blank module)
(3)AC OK LED
(4)PS OK LED
(5)AC power connector on the power supply module

The WS-C2960XR-48LPD-I supports stacking with the optional stack kit. It has the FlexStack-Plus module (hot-swappable) that inserts in the slot located in the switch rear panel, and a 0.5-meter FlexStack cable to connect the FlexStack-Plus module ports. The stack module should purchase separately.

The Accessories

Table 2 shows some accessories of WS-C2960XR-48LPD-I.

ModelsDescription
C2960X-STACKCatalyst 2960-X FlexStack Plus Stacking Module
CAB-STK-E-0.5MCisco FlexStack Stacking Cables
GLC-LH-SMDCisco GLC-LH-SMD 1000BASE-LX/LH SFP transceiver module, MMF/SMF, 1310nm, DOM
GLC-SX-MMD1000BASE-SX SFP transceiver module, MMF, 850nm, DOM
CAB-CONSOLE-RJ45Console Cable 6ft with RJ45 and DB9F
CAB-CONSOLE-USBConsole Cable 6 ft with USB Type A and mini-B

Compare to Similar Items

Table 3 shows the comparison of similar items.

ModelsWS-C2960XR-48FPD-IWS-C2960XR-48LPD-IWS-C2960XR-48LPS-I
Ports48 x 10/100/1000 (POE+)48 x 10/100/1000 (POE+)48 x 10/100/1000 (POE+)
Available PoE Power740W370W370W
Uplinks2 x 10 Gigabit SFP+2 x 10 Gigabit SFP+4 x 1G SFP
Feature SetIP LiteIP LiteIP Lite
FlexStack-Plus StackingOptionalOptionalOptional

WS-C2960XR-48LPD-I Specification

Model Info:WS-C2960XR-48LPD-I
Enclosure typeRack-mountable – 1U
Ports48 x 10/100/1000 (POE+) + 2 x 10 Gigabit SFP+
Network management Interface10/100 Mbps Ethernet (RJ-45)
Available PoE Power370W
Forwarding bandwidth(Gbps)108 Gbps
Maximum stacking number8
Stack Bandwidth80 G
Forwarding Performance130.9Mpps
Switching bandwidth216 Gbps
Maximum active VLANs/td>1023
MAC Address Table Size16K (default)
CPUAPM86392 600MHz dual core
RAM512 MB
Flash Memory128 MB
Status Indicators(1)Per-port status: Link integrity, disabled, activity, speed, and full duplex
(2)System status: System, RPS, PoE, Stack link status, link duplex, and link speed
Expansion / Connectivity 
Console portsUSB (Type-B), Ethernet (RJ-45)
Expansion Slot(s)1 FlexStack-Plus slot and 1 power redundant slot
Stack ModulesC2960X-STACK
Stacking cable(1)CAB-STK-E-0.5M FlexStack-Plus stacking cable with a 0.5 m length
(2)CAB-STK-E-1M FlexStack-Plus stacking cable with a 1.0 m length
(3)CAB-STK-E-3M FlexStack-Plus stacking cable with a 3.0 m length
Power supplyPWR-C2-250WAC
Power DevicePower supply – redundant – plug-in module
Power Redundancyoptional
Voltage range (Auto)110V-240V
Power Consumption Operational0.48kVA
Miscellaneous 
Width17.5 Inches (44.5 cm)
Depth16 Inches (40.8 cm)
Height1.75 Inches (4.45 cm)
Weight14.0Pounds (6.4Kg)
Package Weight35.6 Pounds (16.15 Kg)
Rack Mounting Kitoptional
MTBF in hours275,430
Compliant Standards(1)IEEE 802.1D Spanning Tree Protocol
(2)IEEE 802.1p CoS Prioritization
(3)IEEE 802.1Q VLAN
(4)IEEE 802.1s
(5)IEEE 802.1w
(6)IEEE 802.1X
(7)IEEE 802.1ab (LLDP)
(8)IEEE 802.3ad
(9)IEEE 802.3af and IEEE 802.3at
(10)IEEE 802.3ah (100BASE-X single/multimode fiber only)
(11)IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports
(12)IEEE 802.3 10BASE-T
(13)IEEE 802.3u 100BASE-TX
(14)IEEE 802.3ab 1000BASE-T
(15)IEEE 802.3z 1000BASE-X
(16)RMON I and II standards
(17)SNMP v1, v2c, and v3
(18)IEEE 802.3az
(19)IEEE 802.3ae 10Gigabit Ethernet
(20)IEEE 802.1ax
System software / license 
System softwareIOS IP Lite
licenseENERGY-MGMT, ENERGY-MGT-100-K9
features(1)IP unicast routing protocols (Static, Routing Information Protocol Version 1 [RIPv1], RIPv2, RIPng, and EIGRP-Stub)
(2)Advanced IP unicast routing protocols (OSPF for Routed Access)
(3)EIGRPv3-Stub and PIMv6-Stub are supported as a part of the IPv6 routing suite.
(4)Equal-cost routing
(5)Policy-based routing (PBR)
(6)Hot Standby Routing Protocol (HSRP) and Virtual Router Redundancy Protocol (VRRP)
(7)Protocol Independent Multicast (PIM)
Network security(1)MAC-based VLAN assignment enables
(2)Cisco TrustSec uses
(3)Comprehensive 802.1X
(4)IPv6 First-Hop Security
(5)Device Sensor and Device Classifier
(6)Cisco Trust Anchor Technology
(7)Cisco Threat Defense
(8)Private VLANs
(9)Unicast Reverse Path Forwarding (uRPF)
(10)Multidomain Authentication
(11)Access Control Lists (ACLs)
(12)Switched Port Analyzer (SPAN)
(13)Secure Shell (SSH) Protocol, Kerberos, and Simple Network Management Protocol Version 3 (SNMPv3)
(14)TACACS+ and RADIUS authentication
(15)MAC Address Notification
(16)Multilevel security on console access BPDU Guard
(17)Spanning Tree Root Guard (STRG)
(18)IGMP filtering
Management and Troubleshooting(1)Auto-MDOX
(2)TDR
(3)UDLD
(4)IP SLA Responder
(5)layer 2 / IP Traceroute
(6)SPAN
(7)RSPAN
(8)Express Setup
(9)Device Manager
(10)Cisco Network Assistant
(11)Smartports + Advisor
(12)Troubleshooting Advisor
(13)Drag-and-drop Cisco IOS Upgrade
(14)IP Address DHCP
(15)Autoinstall with saved configuration
(16)Configuration Replace
(17)DHCP Auto Image Upgrade
(18)DHCP Port Based Allocation
(19)Error Disable MIB
Technical Support and Services(1)Cisco SMARTnet Service
(2)Cisco Smart Foundation Service
(3)Cisco Smart Care Service
(4)Cisco SP Base Service
(5)Cisco Focused Technical Support Services
Environmental Ranges 
Operating temperature up to 5000 ft (1500 m)23 Degree Celsius F to 113 Degree Celsius
(-5 Degree Celsius to 45 Degree Celsius)
Operating temperature up to 10,000 ft (3000 m)23 Degree Celsius to 104 Degree Celsius
(-5 Degree Celsius to 40 Degree Celsius)
Short-term exception at sea level*23 Degree Celsius to 131 Degree Celsius
(-5 Degree Celsius to 55 Degree Celsius)
Short-term exception up to 5000 feet (1500 m)*23 Degree Celsius to 122 Degree Celsius
(-5 Degree Celsius to 50 Degree Celsius)
Short-term exception up to 10,000 feet (3000 m)*23 Degree Celsius to 113 Degree Celsius
(-5 Degree Celsius to 45 Degree Celsius)
Short-term exception up to 13,000 feet (4000 m)*23 Degree Celsius to 104 Degree Celsius
(-5 Degree Celsius to 40 Degree Celsius)
Storage temperature up to 15,000 feet (4573 m)-13 Degree Celsius to 158 Degree Celsius
(-25 Degree Celsius to 70 Degree Celsius)
Operating altitudeUp to 10,000 Feet
(Up to 3000 Meters)
Storage altitudeUp to 13,000
(Up to 4000 Meters)
Operating relative humidity10% to 95% noncondensing
Storage relative humidity10% to 95% noncondensing