|WS-C2960XR-48FPD-I Catalyst 2960-XR Series Switches|
|Catalyst 2960-XR-L3, managed, 48 x 10/100/1000 (PoE+) + 2 x SFP+, desktop, rack-mountable, PoE+|
Cisco Catalyst 2960-XR series switches offer power resiliency with optional dual field-replaceable power supplies and IP Lite Cisco IOS software with dynamic routing and Layer 3 features. WS-C2960XR-48FPD-I is one of 2960-XR switches, IP Lite switch, supporting forty-eight 10/100/1000 Ethernet ports with POE+ and two 10G SFP+ uplink interfaces. IP Lite Image enables basic access layer 3 routing features, such as RIPV1, V2, OSPF stub, EIGRP stub, HSRP, VRRP, PIM stub, etc.
|Enclosure Type||Rack-mountable – 1U|
|Feature Set||IP Lite|
|Uplink Interfaces||2 x 10G SFP+|
|Ports||48 x 10/100/1000 (POE+)|
|Available PoE Power||740W|
|Maximum stacking number||8|
|Flash Memory||128 MB|
|Dimensions||44.5 cm x 40.8 cm x 4.45 cm|
The front panel.
There are Forty-eight 10/100/1000 Ethernet Gigabit Ports and two 10G SFP+ uplink Ports on the front panel.
Two USB Type A ports and one USB mini-Type B (console) port are on the left.
This switch offers one RJ-45 console port and one Ethernet management port on the left of the front panel.
Power over Ethernet Plus(PoE+) supports up to 740W of PoE budget for 24 ports with 30W per port or 48 ports with 15.4W per port.
The back panel.
|①||FlexStack-Plus module slot and cover|
|②||Power supply slot (with blank module)|
|③||AC OK LED|
|④||PS OK LED|
|⑤||AC power connector on the power supply module|
The WS-C2960XR-48FPD-I supports stacking with the optional stack kit. It has the FlexStack-Plus module (hot-swappable) that inserts in the slot located in the switch rear panel, and a 0.5-meter FlexStack cable to connect the FlexStack-Plus module ports. The stack module should purchase separately.