
Model Number: |
N9K-C93180YC-FX – Cisco Nexus 9000 Switches |
Detail: |
Nexus 9300 with 48 x 1/10/25-Gbps fiber ports and 6 x 40/100-Gbps QSFP28 ports |
N9K-C93108YC-FX Overview
The Cisco Nexus® 9300-FX Series switches belongs to the fixed Cisco Nexus 9000 platform based on Cisco Cloud Scale technology. The platform support cost-effective cloud-scale deployments, an increased number of endpoints, and cloud services with wire-rate security and telemetry. The platform is built on modern system architecture designed to provide high performance and meet the evolving needs of highly scalable data centers and growing enterprises.
The Cisco Nexus 93180YC-FX Switch is a 1RU switch with latency of less than 1 microsecond that supports 3.6 Tbps of bandwidth and 1.2 bpps. The 48 downlink ports on the 93180YC-FX are capable of supporting 1-, 10-, or 25-Gbps Ethernet or as 16-, 32-Gbps Fibre Channel ports[1], creating a point of convergence for primary storage, compute servers, and back-end storage resources at the top of rack.
The uplink can support up to six 40- and 100-Gbps ports, or a combination of 1-, 10-, 25-, 40, 50-, and 100-Gbps connectivity, offering flexible migration options.
The switch has IEEE compliant, FC-FEC and RS-FEC enabled for 25-Gbps support. All ports support wire-rate MACsec encryption[2]. Please see the Licensing guide section to enable features on the platform.
Quick Specs
Part Number | N9K-C93180YC-FX |
Ports | 48 x 1/10/25-Gbps and 6 x 40/100-Gbps QSFP28 ports |
Downlink supported speeds | 1/10/25 Gbps speeds |
CPU | 6 cores |
System memory | Up to 32 GB |
SSD drive | 128 GB |
System buffer | 40 MB |
Management ports | 1 RJ-45 port L1 and L2 ports are unused |
USB ports | 1 |
RS-232 serial ports | 1 |
Power supplies (up to 2) | 500W AC, 930W DC, or 1200W HVAC/HVDC |
Typical power (AC/DC) | 260W |
Maximum power (AC/DC) | 425W |
Physical dimensions | 1.72 x 17.3 x 22.5 in. (4.4 x 43.9 x 57.1 cm) |
Product Details
Product Details
Figure 1 shows the front panel of N9K-C93180YC-FX

① | 48 x 1/10/25-Gbps Fiber Ports |
② | 6 x 40- or 100-Gigabit QSFP28 optical uplink ports |
The back panel.

① | Power Supply |
② | 4 x Fan Module |
③ | Power Supply |
④ | Out-of-band management port (RJ-45 port) |
⑤ | Chassis LEDs (Beacon [BCN] and Status [STS]) |
⑥ | USB port used for saving or copying functions |
⑦ | Out-of-band management port (SFP port) |
⑧ | Console port (RS232 port) |