|ASR1002-X Aggregation Service Router|
|Cisco ASR1000-series router, Build-in Gigabit Ethernet port, 5G system bandwidth, 6 x SFP ports|
ASR1002-X Aggregation Service Router, Cisco ASR1000-series router, Build-in Gigabit Ethernet port, 5G system bandwidth, 6 x SFP ports
Cisco ASR 1002-X router is delivered into 2 rack unit chassis, the route processor for control plane embedded the services processor for data plane traffic as well as the carrier card which is designed to house I/O modules, share port adopters all integrated in the chassis. ASR 1002-X router comes with 6 build-in SFP ports and 3 box slots for I/O connectivity. The integrated embedded service processors offer 4 levels of system performance: 5Gbps which is default, 10, 20, 36Gbps all through software license upgrade without need for any additional hardware. The integrated the route processor comes by default with 4Gb DRAM, upgradeable to 8, 16Gb.
This ASR1002-X is similar with the ASR1002-X=. The ASR1002-X= is a spare one.
Figure 1 shows the appearance of the Cisco ASR 1002-X.
Table 1 shows the Quick Specs.
|Product Code||Cisco ASR 1002-X|
|System Bandwidth||5G (default) / 10G, 20G,36G (upgrade)|
|Router Processor (RP)||Dual-core 2.13Ghz processor|
|Build-in Gigabit Ethernet port||6 x SFP ports|
|Redundancy||Software (license purchase separately)|
|Cisco ASR 1000 Series ESP||1 ESP slot|
|SIP and Ethernet line card||Integrated ASR 1000-SIP10, not upgradable|
|DRAM Memory||4GB-shared across RP, ESP, and SIP|
|Flash Memory||8 GB|
|Shared port adapters||3 SPA slots|
|External USB flash memory||4-GB USB flash-memory support|
Figure 2 shows the front panel of Cisco ASR 1002-X.
|(1)||Built-in 6x1GE SPA in slot 0|
|(2)||SPA slot 1|
|(3)||SPA slot 3|
|(4)||SPA slot 2|
Figure 3 shows the back panel of ASR1002-X with AC power supply.
ASR1002-X also support DC power supply but the rear panel is different.
Caution! Use only AC power supplies or DC power supplies in the Cisco ASR 1002-X Router. Do not mix power supply types.
The ASR1002-X should be configured with some modules and accessories for normal operation.
Table 2 shows the recommended configuration.
|ASR1K-BB||1||ASR1K-BNG/LNS – tracking only|
|L-SLASR1-IPB=||1||Cisco ASR 1000 IP BASE License|
|M-ASR1002X-4GB||1||Cisco ASR 1002-X 4GB DRAM|
|SASR1K2XU-313S||1||Cisco ASR 1002-X IOS XE UNIVERSAL – NO ENCRYPTION|
|ASR1002-PWR-AC||2||Cisco ASR1002 AC Power Supply|
|CAB-AC-RA||2||Power Cord, 110V, Right Angle|