Cisco catalyst 2960XR-24PD-I IP Lite Base layer 2 - 3 stackable switch is comprised of 24 x 10/100/1000 Ethernet POE+ ports and two SFP+ uplink interfaces. IP Lite Image enables basic access layer 3 routing features, such as RIPV1, V2, OSPF stub, EIGRP stub, HSRP, VRRP, PIM, etc.
|Enclosure Type||Rack-mountable - 1U|
|Feature Set||IP Lite|
|Uplink Interfaces||2 x 10G SFP+|
|Ports||24 x 10/100/1000 (POE+)|
|Available PoE Power||370W|
|Maximum stacking number||8|
|Flash Memory||128 MB|
|Dimensions||44.5 cm x 40.8 cm x 4.45 cm|
|Package Weight||16.15 Kg|
The front panel.
There are twenty-four 10/100/1000 Ethernet Gigabit Ports and two 10G SFP+ uplinks on the front panel.
Two USB Type A ports and one USB mini-Type B (console) port are on the left.
This switch offers one RJ-45 console port and one Ethernet management port on the left of the front panel.
Power over Ethernet Plus (PoE+) supports up to 370W for 12 ports with 30W per port or 24 ports with 15.4W per port.
The back panel.
|①||FlexStack-Plus module slot and cover|
|②||Power supply slot (with blank module)|
|③||AC OK LED|
|④||PS OK LED|
|⑤||AC power connector on the power supply module|
The WS-C2960XR-24PD-I supports stacking with the optional stack kit. It has the FlexStack-Plus module (hot-swappable) that inserts in the slot located in the switch rear panel, and a 0.5-meter FlexStack cable to connect the FlexStack-Plus module ports. The stack module should purchase separately.